One DSK Strapping Tool.  Fully Working. Wt. 5.0 lbs. 10" X 3" X  7"

Up to 3/4

One works well, other needs a small spring/cutter pawl.  13 X 3.5 X 6 

Uniform surface rust. No date visible. As is. wt. 2.4

12 kg is about 26.4 lbs. Cable reels out with tension. Has scratches. as is. wt. 12.45 18 kg is 39.71 lbs

Used but in nice condition. Uses cartridge #230. As is. wt. 4.22

10 1.5in. Stainless steel blade, red devil putty knives.
You get 5 stiff, 5 flexible.
These babies once retailed for $4.99 each.

wholesale lot paint retail

2 Samchully machinery units operating condition unknown. As is. wt. big unit 65 smaller wt. 36

Used untested. A few say 9000 psi. One per sale. As is. wt. 0.70 (each)

Applied power, unit produced a burst of fog/mist. Will test further/fix line cord. wt. 5.38

3 tools, each operates smoothly. One per sale, u pick. As is.?United wt. 0.6, Boker wt. 0.87, Union wt. 0.91

YOU GET EVERYTHING IN THE PHOTOS. UNTESTED. AS IS. WT. 13.63

UNIT IS WORKING BUT GAGE(A DIAL INDICATOR) NEEDS INTERNAL LUBE(ROD DOES NOT SPRING BACK). AS IS. WT 5.4

UNITS ARE UNTESTED. AS IS. WT 2.34

Units look new. Two per sale. As is. wt. 0.34

Got 2 of these from an old guys basement sale. Dont know application but Walter Kidde testing tag is dated 7/6/57 You are bidding on one. As is. Wt 6.52 lbs

Got 2 of these from an old guys basement sale. Dont know application. Other units Walter Kidde testing tag is dated 7/6/57. Serial no. B3. Wt. 6.50 lbs

SAE 72 SS clamps look new but dusty. As is.wt. 3.70. There are 35 clamps. 5 per sale.

5 VERY NICE TEE-HANDLE CLAMPS. PRICE IS FOR EACH. 5TH IS 995AM-0637. AS IS. WT. 2.38

Used pneumatic lubricator. As is. wt. 3.5, may be missing some parts?

Clean machine. Will test. wt. 53 lbs. 32 x 16 x 11

Used, handle tight. As is. wt. 3.05

Applied air to inlet. Unit makes a sucking sound. Float moved freely. Tag barely readable. As is. wt. 1.67

Clamp screw turns. Neck clamp levers move. Long lever handle causes corkscrew to move out, then back in. Have not tried on corked bottle. As is. wt. 4.58

BLACK AND GREEN HOLDERS ARE STURDILY CONSTRUCTED. RED UNIT HAS A SLIGHTLY BENT CLAMP STRAP WHICH COULD USE A LITTLE TWEAKING. AS IS. ET 13.9

Older filter stainless still looks good maybe 1 inch NPT. Tag might say B-10. As is. wt. 5.25

vintage glass working torch. looks all brass.
8 1/2 inches long. 1 1/2 inch diameter 3/4 inch opening.
Valves do not move by hand.
. wt 1.95

Quality Harris Torch. Valves operate smoothly.

I dont have a helium bottle so I cant test this item. weighs 2.35 lbs

Hilti framing pallet nails RH-screw shank 70-7 2 1
Older Hilti nails may also fit Duofast, Senco, etc. .118 dia 2.25 L. 5000 per box. Have not counted all nails. Will inspect and confirm with buyer. Angle estimate . wt 33.4 (15 x 13 ï¾ x 3)

Might be from army/USAF or helicopter or a fancy quick change hoist. wt. --

New unused. Untested. As is. 36 1/2 inches long. Wt. 5.2

Micrometer knob turns smoothly. operating condition unknown. as is. wt. 2.65

sufrace rust. as is. wt. 8.4

No name. Stamped E12B85. Stud is 1/2 in. fine thread. Ring 1/2 in. wt. 9.5, you get all three

Knob rotates. No name found. As is. wt.

3000 PSI,11" Height 12 inches filter to filter. Diameter 2 3/4 approx.

in good shape wt 2.65

Has not been tested. As is.

Bearings spin smoothly. Screw operates smoothly. as is. Wt. 15.7 lbs

Units look unused. You get all in photos, I count 25 but you are buying 23 in the event some are dropped or lost. As is. wt. 1.4

W. H. Nichols aircraft pump. Testing tag is dated 7/15/57. Also have two similar Bendix pumps. Ser wk-6. weighs 4.25 lbs

Steel frame plastic rollers. Look unused. wt 2. lbs.

Opening - Ht 1.450, Width=4.180. Dia of roller=.687.
thickness of metal is .25, the width is 3.5, length is 10, the L protrudes 1.5 from the back surface rollers are 11/16 in dia. outside edge of

Bistro signature collection. In good condition, needs a cleaning. Handle is tight. As is. Wt. 1.84

ROD IS IN GOOD CONDITION. UNIT WORKS BUT THINK PISTON NEEDS A NEW O-RING. STROKE IS 13 IN. 3.625 IS OD OF CYLINDER. AS IS. WT 19.2

working smoothly. Rod is clean. As is Wt. 9.2 lbs

Rod in beautiful condition. Cylinder has been tested and is working well.
Wt. 15.55
Dia. 3.5 in
Stroke 16 in
Rod 1 in

unit is used. looks like friction material is missing. bronze bush under sprocket looks worn, sprocket is 'loose' on bushing wt. 12.0

Bore 1.25, 11/16 pitch, 26 teeth. Ed

D90 TYPE SE APPROX 60:1 INPUT SHAFT OUTPUT SHAFT AS IS. WT. 49

Good used cond. wt. 3.9

Good used cond. wt. 3.52

Good used cond.3.125 = big diameter, 3.055 = small diameter, lengthï¾ 

of that area is 1 7/16.

ï¾ wt. 4.38

Pulley in good shape
Bearings feel OK, will separate
Wt. 25.0 lbs

As is. wt. 6.85 bore 1.5 inch

2 bearings sealed in plastic. Size STK 131438. As is. wt. 1.70

These bearings are used but still tight. You will have to replace eccentric locking rings. Model T-22496. As is. Wt. 17.0

Shafts turn. Input HP 1.25. Gear lash ok. Input shaft 0.625 output shaft 1.0 As is. wt. 31.0

LENGTH 29.5 IN. STEP IS 1.312 AND IS 3.0 LONG. KEY IS .435 WIDE. AS IS. WT. 16.1

unit comes with an extra insert set. AS IS. WT 4.1

new, still in cosmoline. no sign of rust.
OD 2.5
Width of bearing is 1.5 inches&

Photos show everything. Bore 1 7/8, 3/8 key. overall dia. 5 24/32, friction material width 2 17/32. material looks unworn. wt 12.2

Think this might be a Browning. 32 T .5 in. pitch, 5 in. diameter. Threads ok. wt. 4.8

Unit looks barely used. OD 5 5/16 in. Bore 5/8 in. wt. 3.45

Possibly new, not sure. wt. 3.5 (3x12x12)

Looks like it was intended for a specific application. Spins smoothly, as is wt.6.5 lbs

dia. 5.75 in.

2 New 79W4091-001
Untested
400W H-33 Multi tap
Wt. 34

1000W? -? 220V? or? 230V Bulb? -? 9.5 X 16.5? -? Wt. 7 lbs.

Carbon Brush Good - All circuits tested w/VOM - 12" dia. X 9" H
Wt. 31 lbs.